Коммутатор Huawei S5731-S48T4X

Артикул: 002358

Коммутатор Huawei S5731-S48T4X (48*10/100/1000BASE-T ports,4*10GE SFP+ ports,without power module)

Подробнее

Розничная цена

150 000 ₽/шт

Для юридических лиц без НДС

165 000 ₽/шт

Нет в наличии

Нашли дешевле?

Под заказ

Наши менеджеры обязательно свяжутся с вами и уточнят условия заказа

Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах

Описание

S5731-S48T4X (98011847)

Overview

Table 4-1236 Basic information about the S5731-S48T4X

Item	Details
Description	S5731-S48T4X (4810/100/1000BASE-T ports, 410GE SFP+ ports, without power module)
Part Number	98011847
Model	S5731-S48T4X
First supported version	V200R021C10SPC600
Supported Patch Version	If V200R021C10SPC500 is used, install V200R021HP0121 or a later patch.

Components

Figure 4-488 S5731-S48T4X appearance

1	Forty-eight 10/100/1000BASE-T ports	2	Four 10GE SFP+ optical ports
3	One console port	4	One ETH management port
5	One USB port	6	One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7	Ground screw NOTE: It is used with a ground cable.	8	Power module slot 1 NOTE: Applicable power modules: PAC150S12-R (150 W AC Power Module) PDC180S12-CR (180 W DC Power Module) PAC600S12-CB (600 W AC&240 V DC Power Module) PAC600S12-DB (600 W AC&240 V DC Power Module) PAC600S12-EB (600 W AC&240 V DC Power Module)
9	Power module slot 2 NOTE: Applicable power modules: PAC150S12-R (150 W AC Power Module) PDC180S12-CR (180 W DC Power Module) PAC600S12-CB (600 W AC&240 V DC Power Module) PAC600S12-DB (600 W AC&240 V DC Power Module) PAC600S12-EB (600 W AC&240 V DC Power Module)	-	-

Ports

Table 4-1237 Ports on the S5731-S48T4X

Port	Connector Type	Description	Available Components
10/100/1000BASE-T port	RJ45	A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
10GE SFP+ optical port	SFP+	A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.	GE eSFP optical modules GE-CWDM eSFP optical modules GE-DWDM eSFP optical modules GE SFP copper module 10GE SFP+ optical modules (OSXD22N00 not supported) 10GE-CWDM SFP+ optical modules 10GE-DWDM SFP+ optical modules 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables 3 m and 10 m SFP+ AOC cables 0.5 m and 1.5 m SFP+ dedicated stack cables (only for zero-configuration stacking)
Console port	RJ45	The console port is connected to a console for on-site configuration.	Console cable
USB port	USB 2.0 Type A	The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.	USB flash drive
ETH management port	RJ45	You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port.	Ethernet cable

Indicators and Buttons

The S5731-S48T4X has similar indicators to those on the S5731-S48P4X except that the S5731-S48T4X does not have a PoE mode indicator. For details, see the S5731-S48P4X.

Power Supply System

The switch can use a single power module or two power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch. However, the power modules with natural heat dissipation and the power modules with fan cannot be used at the same time.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left, right, and front sides, and exhausts from the rear panel.

Click to enlarge

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-1238 Technical specifications of the S5731-S48T4X

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.54 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.64 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	185 mm x 650 mm x 550 mm (7.28 in. x 25.59 in. x 21.65 in.)
Chassis height [U]	1 U
Weight without packaging [kg(lb)]	5.01 kg (11.05 lb)
Weight with packaging [kg(lb)]	7.54 kg (16.62 lb)
Typical power consumption [W]	78 W
Typical heat dissipation [BTU/hour]	266.14 BTU/hour
Maximum power consumption [W]	111 W
Maximum heat dissipation [BTU/hour]	378.74 BTU/hour
Static power consumption [W]	50 W
MTBF [years]	73.81 years
MTTR [hours]	2 hours
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	45.62 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]	31.94 dB(A)
Number of card slots	0
Number of power slots	2
Number of fans modules	2
Redundant power supply	1+1 Pluggable AC and DC power modules can be used together in the same switch, but power modules that use natural heat dissipation and power modules that use air cooling cannot be used together.
Long-term operating temperature [°C(°F)]	-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). The operating temperature of the switch is -5°C to +45°C (23°F to 113°F) when 10GE SFP+ optical modules with 40 km or longer transmission distances are used.
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	Pluggable power supply
Rated input voltage [V]	AC input: 100 V AC to 240 V AC; 50/60 Hz High-voltage DC input: 240 V DC DC input: –48 V DC to –60 V DC
Input voltage range [V]	AC input: 90 V AC to 290 V AC; 45–65 Hz High-voltage DC input: 190 V DC to 290 V DC DC input: -38.4 V DC to -72 V DC
Maximum input current [A]	The current specifications depend on the pluggable power modules in use. For details, see the related power module specifications.
Memory	2 GB
Flash memory	1 GB in total. To view the available flash memory size, run the display version command.
Console port	RJ45
Eth Management port	RJ45
USB	Supported
RTC	Supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±7 kV
Power supply surge protection [kV]	Configured with AC power modules: ±6 kV in differential mode and ±6 kV in common mode Configured with DC power modules: ±2 kV in differential mode and ±4 kV in common mode
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	Built-in
Heat dissipation mode	Air cooling for heat dissipation, intelligent fan speed adjustment
Airflow direction	Air flows in from the left, right, and front, and flows out from the rear.
PoE	Not supported
Certification	EMC certification Safety certification Manufacturing certification