MB Supermicro X11SSL-F LGA1151 C232

Артикул: 001429

Мат. плата SuperMicro X11SSL-F LGA1151 PCI-E SVGA 2xGbLAN SATA RAID MicroATX 4DDR4

Подробнее

Для физических лиц

21 275 ₽/шт

Для юридических лиц с НДС 5%

21 275 ₽/шт

Есть в наличии (4)

Нашли дешевле?

- +

В корзину

Рассчитать доставку

Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах

Описание



Processor

CPU	Intel® Celeron®, Intel® Pentium®, Intel® 7th/6th Generation Core i3 series, Intel® Xeon® processor E3-1200 v6/v5 Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 80W TDP
Note	BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series



System Memory

Memory Capacity	4 DIMM slots 64GB ECC UDIMM, DDR4-2400MHz
Memory Type	2400/2133/1866/1600MHz SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes	4GB, 8GB, 16GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors



On-Board Devices

Chipset	Intel® C232
SATA	Intel® C232 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI	ASPEED AST2400 BMC
Graphics	ASPEED AST2400 BMC
Network Controllers	Dual LAN with Intel® Ethernet Controller I210-AT



Input / Output

USB	3 USB 3 port(s) (1 Type A; 2 via header) 6 USB 2.0 port(s) (4 via header; 2 rear) 2 USB 3.0 port(s) (2 rear)
Video Output	1 VGA port(s)
Serial Port	1 COM Port(s) (1 rear)
TPM	1 TPM Header

Expansion Slots

PCI-E	1 PCI-E 3.0 x8 (in x16 slot), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8 slot)



System BIOS

BIOS Type	128MB SPI Flash EEPROM with AMI BIOS
BIOS Features	ACPI 1.0 / 2.0 / 3.0 / 4.0 APM 1.2 DMI 2.3 Hardware BIOS Virus protection PCI 2.3 Plug and Play (PnP) SMBIOS 2.7.1 UEFI 2.3.1 USB Keyboard support



Management

Software	SuperDoctor® 5, NMI, SUM, SSM, IPMI2.0, Watchdog
Power Configurations	Power-on mode for AC power recovery, ACPI Power Management



PC Health Monitoring

Voltage	VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V
LED	UID/Remote UID CPU / System Overheat LED
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN	5x 4-pin fan headers (up to 5 fans) Thermal control tachometer fan connectors Fan speed control Overheat LED indication
Other Features	WOL CPU thermal trip support for processor protection Control of power-on for recovery from AC power loss



Operating Environment

Operating Temperature Range	0°C - 50°C (32°F - 122°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non Operating Relative Humidity Range